Inconel 625
Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength.
Inconel 625 in this grade in the following forms: Bar, square bar, wire cuts, sheet, plate, tube, pipe, fastener, disk, machined, forged.
Standard: AMS 5599, AMS 5666, ASTM B446, ASTM B443, UNS N06625
Product size can be customized according to customer needs.
Email: [email protected]
WhatsApp: 0086-18939717601
● Any type and size can be custom made.
● Minimum order quantity: from 10 kg
● Payment method: FOB Shanghai etc., CNY or USD
● Shipping method: sea, railway, air transport
● Packing: strong packaging
Form | Standard |
---|---|
Metal Type | UNS N06625 |
Bar | ASTM B446 AMS 5666 BS3076 |
Wire | AMS 5837 |
Sheet | ASTM B443 AMS 5599 BS3072 |
Plate | ASTM B443 AMS 5599 BS3072 |
Pipe | ASTM B444 ASTM B704 AMS 5581 BS3074 GE B50TF133 |
Tube | ASTM B444 ASTM B704 AMS 5581 BS3074 GE B50TF133 |
Fitting | ASTM B366 Din 17754 |
Forging | |
Weld Wire | |
Weld Electrode | |
NA 21 | All forms |
Din | 2.4856 |
Product Name | Monel / Hastelloy / INCOLOY Alloy | ||
Type | Bar / Rod | Pipe /Tube | Plate/Sheet |
Size | φ4-50mm;or as required Length:2000-12000mm |
φ6-273mm;δ1-30mm;or as required Length:1000-12000mm |
Width:40-3500mm,or as required Length:As Required |
Standard | ASTM,JIS, AISI, GB, DIN, EN | ||
Grade (ASTM UNS) |
Inconel: Inconel100,Inconel 600,Inconel 601,Inconel602CA Inconel 617, Inconel 625LCF, Inconel 686 Inconel 690 Inconel 718, Inconel 725, Inconel X-750 Hastelloy: Hastelloy B, Hastelloy B-2, Hastelloy B-3, Hastelloy C Hastelloy C-22, Hastelloy C-4, Hastelloy C-276 Hastelloy C-2000, Hastelloy G, Hastelloy G-3 Hastelloy G-35 Monel: Monel 400, Monel 401, Monel 404, Monel R405 Monel K-500 Nickel: Nickel 200, Nickel 201, Nickel 205 Nimonic: Nimonic 75, Nimonic 80A, Nimonic 90,Nimonic 105 Nimonic 115, Nimonic 901 Udimet: Udimet 188, Udimet 720, Udimet R41, Udimet 300 Haynes: Haynes 230, Haynes 556, Haynes 188 Incoloy: Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Incoloy 925, Incoloy 926 GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 Alloy: Alloy 20/28/31; |
||
Grade (EN) | 2.4060, 1.4980, 1.4529, 2.4460, 1.4563, 1.4886, 1.4876, 1.4876, 2.4858, 2.4816, 2.4851, 2.4856, 2.4856, 2.4668, 2.4669, 2.4360, 2.4375, 2.4819 | ||
Surface | Bright, Polished, Pickling, Acid cleaning, Sandblasting | ||
Technique | Cold Rolled Hot Rolled | ||
Edge | Mill Edge / Slit Edge | ||
Supply Ability | 5000 Ton/Tons per Month |
Characteristics
Excellent mechanical properties at both extremely low and extremely high temperatures.
Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.
Almost complete freedom from chloride induced stress corrosion cracking.
High resistance to oxidation at elevated temperatures up to 1050C.
Good resistance to acids, such as nitric, phosphoric, sulfuric and hydrochloric, as well as to alkalis makes possible the construction of thin structural parts of high heat transfer.
Applications
Components where exposure to sea water and high mechanical stresses are required.
Oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150C.
Components exposed to flue gas or in flue gas desulfurization plants.
Flare stacks on offshore oil platforms.
Hydrocarbon processing from tar-sand and oil-shale recovery projects.
Chemical Requirements | |||||||
---|---|---|---|---|---|---|---|
Ni | Fe | Cr | Si | Mo | Mn | C | |
Max | 5.0 | 23.0 | 0.50 | 10.0 | 0.50 | 0.10 | |
Min | 58.0 | 20.0 | 8.0 |
Tensile Data
Mechanical Property Requirements | |||||
---|---|---|---|---|---|
Ultimate Tensile | Yield Strength (0.2% OS) | Elong. in 2 in. or 50mm or 4D, min., % | R/A | Hardness | |
Cold Worked/Annealed | |||||
Min | 120 KSI | 60 KSi | 30 | ||
Max | |||||
Min | |||||
Max | |||||
Hot Worked/Annealed | |||||
Min | 120 KSi | 60 KSi | 30 | ||
Max | |||||
Min | |||||
Max |