Nickel-Based Alloys
Nickel alloys are widely used in sectors such as energy development, chemical industry, electronics, navigation, aviation and aerospace. Nickel can form various alloys with copper, iron, manganese, chromium, silicon and magnesium. It has high strength and good plasticity.
Changjin provide nickel and nickel alloys in many stock shapes and forms. Semi-finished stock shapes are suitable for part fabrication by machining, assembly, or other processes. They are also used as feedstock for casting, forging, and spinning.
Common stock shapes and forms for nickel and nickel alloys include bars, rods, tubes, plates, profiles, sheets, strips, shims, spheres, foil, wire, billets, slabs, and blooms. Materials are also supplied as billets, ingots, powders, fillers, and reinforcements. Round, hexagonal, coil, and hollow stock are also available.
Selecting nickel and aluminum alloys requires an analysis of dimensions, production processes, and performance features. Outer diameter (OD), inner diameter (ID), overall length, and overall thickness are important dimensions. Most materials are cast, wrought, extruded, forged, cold-finished, hot-rolled, or formed by compacting powdered metals or alloys.
Email: [email protected]
WhatsApp: 0086-18939717601
● Any type and size can be custom made.
● Minimum order quantity: from 10 kg
● Payment method: FOB Shanghai etc., CNY or USD
● Shipping method: sea, railway, air transport
● Packing: strong packaging
Types of nickel-based alloys: superalloys, corrosion-resistant alloys, Hastelloy, Monel, dual-phase steel, urea steel, heat-resistant steel, alloy steel, nickel-based alloys, etc.
Common grades of nickel-based alloys: monel400, monelk500, Inconel600, inconel601, inconel625, inconel690, incoel718, inconelX750, incoiloy800, incoloy825, HastelloyC276, Hastelloyc22, Hastelloyb2, etc.
| 1 | China GB |
American UNS |
German SEW VDIUV |
EN BS |
France AFNOR |
| Incoloy 800 | NS111 | N08800 | W.Nr.1.4876 X10NiCrAlTi3220 |
NA15 | Z8NC32.21 |
| Incoloy 800H | NS112 | NO8810 | W.Nr.1.4958 X5 NiCrAlTi 31-20 |
NA 15 (H) | |
| Incoloy 800HT | N08811 | W.Nr.1.4959* X 8 NiCrAlTi 32-21 |
|||
| Incoloy 825 | NS142 | N08825 | W.Nr.2.4858 NiCr21Mo |
NA16 | NC21FeDu |
| Inconel 600 | NS312 | N06600 | W.Nr.2.4816 NiCrl 5Fe |
NA14 | NC15FE |
| Inconel 601 | NS313 | N06601 | W.Nr.2.4851 NiCr23Fe |
NC23FeA | |
| Inconel 625 | NS336 | N06625 | W.Nr.2.4856 NiCr22Mo9Nb |
NA21 | NC 22 DNb |
| Inconel 718 | GH4169 | N07718 | W.Nr.2.4668 NiCr19Fe19Nb5Mo3 |
NA 51 | NC19FeNb |
| Incoloy 926 | N08926 | W.Nr.1.4529 X1NiCrMoCu |
X1NiCrMoCu | X1NiCrMoCu | |
| Inconel X-750 | GH4145 | N07750 | W.Nr.2.4669 NiCr15Fe7TiAl |
NC15TNbA | |
| Monel 400 | N04400 | W.Nr.2.4360 NiCu30Fe |
NA 12 | Nu 30 | |
| Hastelloy B | Ns321 | N10001 | |||
| Hastelloy B-2 | NS322 | N10665 | W.Nr.2.4617 NiMo28 |
NiMo28 | |
| Hastelloy C | NS333 | ||||
| Hastelloy C-22 | N06022 | W.Nr.2.4602 | |||
| Hastelloy C276 | NS334 | N10276 | W.Nr.2.4819 NiMo16Cr15W |
NC17D | |
| 254SMO | S31254 | W.Nr.1.4547 | |||
| 904L | N08904 | W.Nr.1.4539 | |||
| GH1140 | GH1140 | ||||
| GH2132 | GH2132 | S66286 | W.Nr.1.4890 | ||
| GH3030 | GH3030 | ||||
| GH3044 | GH3044 | ||||
| GH3128 | GH3128 | ||||
| Carpenter 20 | NS143 | N08020 | W.Nr.2.4660 NiCr20CuMo |
||
| Alloy31 | N08031 | W.Nr.1.4562 X1NiCrMoCu32-28-7 |
|||
| Invar 36 | K93600 | W.Nr.1.3912 Ni36 |
X1NiCrMoCu | Fe-Ni36 |
| Alloy # | Cr | Ni | C | Mn. Max. | Si Max. | P Max. | S Max. | Other Elements |
|---|---|---|---|---|---|---|---|---|
| Carpenter 20Cb-3 | 20.0 | 35.0 | 0.06 Max. | 2.0 | 1.0 | 0.035 | 0.035 | Cu 3.5, Mo 2.5, Nb+Ta 8xC Min/1.0 Max |
| Haynes 25 (L605) | 20.0 | 10.0 | 0.05/0.15 | 2.0 | 1.0 | .... | .... | Co 50.0, W 15.0 |
| Hastelloy B-2 | 1.0 | 68.0 | 0.02 Max. | 1.0 | 0.10 | 0.04 | 0.03 | Mo 28.0, Co 1.0 |
| C-276 | 15.5 | 57.0 | 0.02 Max. | 1.0 | 0.08 | 0.03 | 0.03 | Mo 16.0 |
| Hastelloy X | 21.8 | 47.5 | 0.05/0.15 | 1.0 | 1.0 | 0.04 | 0.03 | Mo 9.0, Co 1.5 |
| Inconel 600 | 15.50 | 76.0 | 0.15 Max. | .... | .... | .... | .... | .......... |
| Inconel 601 | 23.0 | 60.5 | 0.10 Max. | .... | .... | .... | .... | Al 1.00/1.70 |
| Inconel 625 | 21.5 | 61.0 | 0.10 Max. | .... | .... | .... | .... | Mo 9.0, Nb+Ta 3.6 |
| Inconel 718 | 19.0 | 52.5 | 0.08 Max. | .... | .... | .... | .... | Mo 3.0, Nb+Ta 5.1 |
| Incoloy 800 | 21.0 | 32.5 | 0.10 Max. | .... | .... | .... | .... | .......... |
| Incoloy 825 | .... | .... | .... | .... | .......... | |||
| Monel 400 | ..... | 66.5 | 0.30 Max. | .... | .... | .... | .... | Cu 31.5 |
| Nichrome V | 20.0 | 80.0 | .... | .... | .... | .... | .... | .......... |
| Nickel 200 | ..... | 99.6 | 0.15 Max. | .... | .... | .... | .... | .......... |
| Nickel 201 | ..... | 99.6 | 0.02 Max. | .... | .... | .... | .... | .......... |
| Product Name | Monel / Hastelloy / INCOLOY Alloy | ||
| Type | Bar / Rod | Pipe /Tube | Plate/Sheet |
| Size | φ4-50mm;or as required Length:2000-12000mm |
φ6-273mm;δ1-30mm;or as required Length:1000-12000mm |
Width:40-3500mm,or as required Length:As Required |
| Standard | ASTM,JIS, AISI, GB, DIN, EN | ||
| Grade (ASTM UNS) |
Inconel: Inconel100,Inconel 600,Inconel 601,Inconel602CA Inconel 617, Inconel 625LCF, Inconel 686 Inconel 690 Inconel 718, Inconel 725, Inconel X-750 Hastelloy: Hastelloy B, Hastelloy B-2, Hastelloy B-3, Hastelloy C Hastelloy C-22, Hastelloy C-4, Hastelloy C-276 Hastelloy C-2000, Hastelloy G, Hastelloy G-3 Hastelloy G-35 Monel: Monel 400, Monel 401, Monel 404, Monel R405 Monel K-500 Nickel: Nickel 200, Nickel 201, Nickel 205 Nimonic: Nimonic 75, Nimonic 80A, Nimonic 90,Nimonic 105 Nimonic 115, Nimonic 901 Udimet: Udimet 188, Udimet 720, Udimet R41, Udimet 300 Haynes: Haynes 230, Haynes 556, Haynes 188 Incoloy: Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Incoloy 925, Incoloy 926 GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 Alloy: Alloy 20/28/31; |
||
| Grade (EN) | 2.4060, 1.4980, 1.4529, 2.4460, 1.4563, 1.4886, 1.4876, 1.4876, 2.4858, 2.4816, 2.4851, 2.4856, 2.4856, 2.4668, 2.4669, 2.4360, 2.4375, 2.4819 | ||
| Surface | Bright, Polished, Pickling, Acid cleaning, Sandblasting | ||
| Technique | Cold Rolled Hot Rolled | ||
| Edge | Mill Edge / Slit Edge | ||
| Supply Ability | 5000 Ton/Tons per Month | ||
| Price Term | CIF CFR FOB EX-WORK | ||
| Payment Terms | T/T L/C and Western Union etc | ||
